Reasons and troubleshooting methods for the inability of loaders to move

The loader manufacturer recommends that small forklifts check the transmission oil level positioning valve and transmission pressure gauge. If a lack of transmission distance oil is found, new oil should be added, but not too much, otherwise it will cause the transmission to become hot. Usually, oil is added to the positioning valve to flow out.

Next, check whether the boom can take off and land, and whether it can be converted. If the boom can be lifted, lowered, or converted, but the machine itself cannot achieve the walking process. This is mainly due to the damage of the variable speed pump and the lack of oil and water. If the boom cannot take off and land, cannot achieve the transition process, and cannot complete walking itself. This situation is mostly caused by the steel plate connection of the cutting machine gearbox being cut off by bolts and the elastic plate cracking. Lift out the diesel engine and gearbox, remove the connection position of the torque converter diesel engine, inspect the damaged area, and replace and repair the parts.

If there is a situation where the loader shovel cannot move, do not panic, identify the cause and check the fault. I hope the above can help everyone to a certain extent. If you need it, please contact us.

What is the internal combustion equipment of the small shovel cutting machine? The internal combustion engine of small forklifts for cutting machines generally adopts a fully imported MICO hydraulic braking system and an automatic energy storage system with power disconnection configuration, making driving easier and more convenient. The main function of butter is lubrication and sealing. How does it work under load?

The internal combustion cutting machine is equipped with a large bore lifting cylinder and a rotary bucket cylinder to enhance lifting and digging forces, and maintain load balance by evenly distributing the load bucket. If internal combustion cutting machine brand enterprises want to successfully transform, they need perseverance. Internal combustion cutting machine brand enterprises should continue to consolidate their existing position, while small and medium-sized enterprises should face difficulties and narrow the polarization gap. Absorb and eliminate the impact vibration of the transmission device from the engine and external load of Jingong small loader. Do not install anti-skid chains when the tire pressure is low.